Showing posts with label projection. Show all posts
Showing posts with label projection. Show all posts

Saturday, February 27, 2010

Invisible AV - How to Hide an AV Set Up and Save Money at Your Next Event

Invisible AV set-ups, where the AV person and main loudspeakers are hidden from view behind the screen, ensure quick reactions by the AV technician to any problems which may arise as well as having the appearance that the show is running by itself.

Two major concerns among fellow technicians include a lack of proper monitoring out front and loudspeakers not on stands, above the ears of the audience - two issues which shall be addressed here.

The following picture illustrates some of the benefits of hiding the audiovisual technology behind the screen (in this case a rear-projection screen) - no cables taped to the floor and no speakers on stands. Showing too much technology tends to look less streamlined, which is why some AV companies and operators insist upon setting up a 'skirted area' at the back of the room so they don't stand out too much, but they are still very much out there.


Going with a rear-projection set-up such as the this won't work in all rooms, however, and must be planned out carefully so that a given projector can fill the screen from behind. The screen shown is a 6 X 8 foot Dalite Fastfold. To fill the screen, there needed to be about 16 feet behind it using a projector with a 1.1:1 zoom ratio, which means the projector lens can make the image 10% larger than the smallest image setting. For rooms with less area behind the screens, a zoom ratio of 1.6:1 would be needed, so that only 12 feet would be needed behind the screen.

The primary loudspeaker was positioned behind the skirt* of the screen and aimed out toward the seated audience, while a second loudspeaker was above the rear half of the audience, aimed down and hidden behind the golden handrail, which is just out of frame to the right. The ideal set-up would have included an audio delay to keep the 'fill' speaker from being noticeable, but turning it lower in volume than the main speaker also works well.

* the skirting for the screen frame should be thin enough to avoid cutting out the higher audio frequencies that are needed for audio intelligibility 

The invisible AV set-up has some distinct advantages over the traditional back-of-room AV set-up, including:

1) There are fewer cables to route to the back of the room - this should save some money** because there is less to set up and there will be no unsightly cables taped to the floor that people can trip over. 

** individual AV companies differ in this respect, so ask a lot of questions

2) The AV technician can respond immediately*** if technical problems should arise - this saves time and keeps things running smoother as the technician doesn't have to run to the front of the room to fix the problem (this is especially important where there are no proper aisles planned when setting up tables).

*** not all AV staff will help with EVERY aspect of the technical side of things - for example, some technicians will not do much about trouble with multimedia playback that doesn't go as planned

3) The projector doesn't take up room in front of the screen - if you decide that rear-projection is right for the room and event, you will not have to worry about somebody bumping into the projector table (or cart), nobody can trip over the cabling and there will be more room for an extra table or two for the audience.

To sum up, the invisible AV set-up is a streamlined way of running the technical side of an event that can save you money on set-up and strike, look as though it is running by itself and has the benefit of less cabling exposed. Even if you must use front-projection because of the room size, you can still minimize exposed cabling and still have the AV technician close by.

Monitoring the event is quite easy as the AV technician can do an occasional walk-around to ensure proper audio levels and, in the case of two-screen set-ups, can angle the screens 'in' to be able to monitor what's being projected from behind a screen (see picture below). The invisible AV set-up is ideal for meetings of up to 200 people where the meeting planner needs excellent results within a modest budget.

Here is one more example of a two screen, front projection set-up at an event for 180 people in New York City:

 
I had a clear view of the presenters and the screen content 
with perfect control of the multimedia playback.

- Buck Moore can be reached at www.b4ushowit.com or email: buck@buckmoore.net

Saturday, July 12, 2008

Audiovisual Field Testing: Projection.

Report on AV Technology: What Works Well in the World of Multimedia Presentations (and What Could Work Better!).

CONTENT ASSESSMENT - PRESENTATION TECHNOLOGY - LIVE EVENT MULTIMEDIA

In my travels as a presentation AV and multimedia playback specialist, I continually face AV challenges and offer solutions during live events. During the last twenty years, I've been performing live, presenting material in front of groups and running the technical side of live performances, public speaking, multimedia playback and I know what works and what doesn't work.

Over these years, I've worked on many film and video projects as writer, director, camera person, actor and editor, and that experience has made me very interested in helping people assess their live presentation content. Whether it's a business presentation, live performance or film screening, I am very interested in what the end user experiences. In AV planning and content assessment, I am not a critic, I am the ultimate end user and I tell it like it is.

I'd like to start this AV field report with my technology choice for projectors:

Canon LV-7255 (and others in the LV series): This is my projector of choice. I've used several LV projectors and I like them all, especially the newer ones. The brightness is great for presentations of up to 150 - 200 people (with stereo screens on Dalite FastFold 7.5' x 10', front projection screens). I use longer VGA cable runs of 25 - 50 feet, so I use a Kramer D.A.(distribution amp) for the stereo display, but I have even run these projectors through a daisy-chain (one connected to the other) and a 50 foot VGA cable with no D.A. and I get great results every time.

I've really put these projectors through the paces and two of the reasons I rely on them are because of the manual zoom and the manual focus. It would be nice to have a horizontal keystone control, but the vertical control, especially auto-keystone, works very quickly and well.

Like many projectors I've used, when computer inputs are hot-swapped, you may end up with horizontal sync issues that result in the side of a presentation being cut off, but that is easily correctable with the 'auto PC' button on the top of the unit. I know it would be best not to hot-swap and have all computers hooked up to a seamless switcher and ready to go, with all resolutions set to the default 1024x768, but I am talking about the real world, where things are set up and swapped at a moments notice. Therefore, I need a projector which does not give me grief on the road.

Stay tuned for more!