Showing posts with label buck moore. Show all posts
Showing posts with label buck moore. Show all posts

Saturday, February 27, 2010

Invisible AV - How to Plan a Stealthy Loudpseaker Set-up (by Buck Moore)

A traditional loudspeaker set-up for a business meeting might include a left and right speaker on either side of the stage or the use of the ceiling-mounted distributed speaker system already installed in the venue. Often, the former are medium-sized cabinets that can obscure viewing angles and the latter can sometimes sound 'tinny', if not simply cut out sound from time to time (the audio controls are usually pre-set and can collect dust, which can cause the sound to be intermittent even at the finest of venues).

Aside form being very 'present' in a room, medium-sized speaker cabinets can have annoying little lights on the front of them and their larger speaker stands can create extra trip hazards. Using smaller speakers with high audio output can allow the AV technician to create zones of audio and adjust each zone independently and on-the-fly as needed. Also, smaller speakers won't obstruct viewing angles and can sit on smaller stands or even small tables, which are unlikely to be tripped over.

Large speakers at the front are usually only useful for live music and DJ's, where a full sound is desired, but for speaking voices and multi-media, they are very often unnecessary. Ideally, speaker zones should be planned with a combination of powered and non-powered speakers, especially along air-walls, where running power drops to them can be a pain.

Below are two examples of zones created with powered and non-powered speakers from initial planning to implementation:


The bottom example was planned for front projection, but we actually decided to go with rear projection because we had the room behind the screens - it was an aesthetic choice by the meeting planner and would allow for more tables near the front (not to mention the venue politics involved in getting the event up and running).

Using smaller cabinets, distributed throughout the room and aimed properly (to even out levels and avoid audio delay effects) can cover large audiences and minimize the appearance of loudspeakers everywhere. Proper planning of an audio system cannot be left to chance and following these simple guidelines can make your next meeting an AV success!

- Buck Moore can be reached at www.b4ushowit.com.

Tuesday, January 19, 2010

How To Make Lighting Work For Your Event (by Terry Holdershaw)

Lighting is something that is often over-looked which is a shame as lighting can make a huge impact on any event, small or big. Whether you are having a meeting of conference for 50 people or a huge gala for 3000 people, lighting can make a huge difference and impact on your event.

From simply lighting up the podium or stage to adding room ambience and logo projection, lighting is a very important aspect to every event.
Whenever you have a presenter or performer you should always have the podium or stage that they will be presenting from lit up, especially if there will be photo or video being taped. Typically you will use a Ellipsoidal lighting fixture, known as a Leko Light to light up a podium or stage.

Leko Lights are adjustable and focusable to light up only the specific area, such as a podium that you want. This is especially important when you also have video projection being used in the room as you don’t want to wash out the screen with the light. Leko’s are very bright and can light up a podium or stage from the back or side of pretty much any meeting room. It is best practice to light up a person or object from two angles, one light from each side for even light and to avoid shadows.

It is also important to use a dimmer pack and control console with these lights so you can adjust the brightness of the light. For lighting a stage there are also Par-Can lights that are often used, you see these most often on music stages and concerts. Par Can’s have to be used closer to the stage, typically they are hung above the front line of the stage and also are used on the back and side lines of the stage as well. Par-Can’s are not focusable or adjustable, you can insert gels into the light to change the colour and that’s about it, but they are very good for lighting up a stage and bands.


The biggest trend with lighting is LED and ambient room lighting. The most popular type of LED Lights right now are LED Pars and LED Bars. The pars are similar to the traditional par-can, but with LED lights, not quite as bright, the white isn’t as white as a traditional light bulb and you can change the colours of the LED’s very easily. The LED Bars are the same idea and concept of the LED Par except they are in the shape of a bar about 3 feet long. LED Bars and Pars are often used and look great for up-wall lighting, lighting up bars, the backdrops of stages, head tables, entry ways, pillars, doors, art pieces, signs and much more.

LED’s are very versatile, you can change the colours, brightness, create colour scrolling patterns, strobe and much more with a controller such as the computer based Martin Light Jockey. LED Technology is advancing very fast and improving, they now have moving head LED Lights and also LED’s that are able to create a white almost the same as the traditional lights, but they are very expensive and most AV companies are not carrying these models yet.


Intelligent Moving Head Lights are very common for larger events, mainly galas, awards ceremonies, weddings, AGM’s, but also can be used at meetings and conferences. Moving Head lights are very useful and versatile lights. They are called “intelligent” lights because you are able to control and program the light to tell it what you want it to do whether it be to change colours, pattern, shape or to move around the room fast or slow, etc. Martin is the industry standard for moving head lights with their most common fixture being the Mac 250, there is also competitors out there, most popular being the Elation Design Spot.

Here are just a few common uses for intelligent moving head lights: pin spot a podium, stage wash, dance floor lighting, ambient room lighting, Hollywood light theme, custom gobo projection and much more. The basic idea of these lights is that the lamp projects it’s light through a circular lens, there is then a colour wheel that you can change the colour of the light and there is also a gobo wheel that you can change the pattern or design of the light.

A gobo can be made of either glass or metal which when placed in front of the lamp, it projects whatever pattern or image is on the gobo, for example you have a metal gobo with a star shape cut out of it, the star is what will be projected by the light. You can have custom gobo’s made with company logos, slogans, etc. made which is popular for corporate events that want to have their company at the forefront of the guests mind.

Custom Gobo’s can be made for all moving head lights as well as Leko Lights and a few other Gobo Projection lighting fixtures such as the Martin PR1.
If you are looking to impress your guests at your next event, whether it be a Sales Meeting, AGM, Gala, Awards Ceremony, Wedding, Holiday Party, Customer Appreciation Event or Grand Opening make sure to consider and think about lighting to help enhance your event and make it memorable for your guests. Everybody has been to a boring plain meeting or banquet room and nothing really stands out about that, but you can really transform and add a lot to a room by adding a little bit of lighting.

- Terry Holdershaw
Scotia Entertainment
Terry grew up in Nova Scotia and moved to Toronto in 2001 where he attended and graduated the Audio Engineering Technology program at Trebas Institute. He also took additional courses in the Music Business Management program at the International Academy of Technology. Terry has extensive DJ experience ranging from Bars & Clubs to Weddings, Corporate Events, Award Shows, Gala’s, Festivals, Fundraisers, Stag & Does, School Dances and Proms.

Wednesday, April 8, 2009

Five Tips for Better Presentations

Instead of writing a whole bunch, I am posting this video with five quick presentation tips. It is a part of my 'Better Presentations' package which will be available soon for either download or ordering a hard copy. To sum up the tips:

1) Choose a font that can be read from a distance. This usually means a big, bold font that can be read from the back of the room and even in brighter rooms. Stay away from fancy fonts, especially, when they are small.....people cannot read them from the back.

2) Choose a background color that does not interfere with the font & works in bright rooms.

3) Use as few words as possible. The slides themselves can serve as 'spark words' that can set you off on a topic. The less people have to read, the more they can listen to your message.

4) Practice as much as possible. People want you to do well, but you don't have to be the perfect presenter, you just need to be able to get the message across and be as smooth as possible. Practice speaking in your car, in a quiet room where you can't be disturbed and even consider recording your speech on a voice recorder, then listen back to it as often as possible.

5) Practice 'microphone technique'. Actually learn how to use a microphone. Sound silly? Well, a lot of people don't know how to use one properly. It's not hard, takes some time and it's easy to master the very few principles involved.

There is much more in the full package available soon. I'll cover such things as audio & video playback from a computer, presentation technology, video recording, how to make a video demo, advanced lecture tips, back up plans, DVD compatibility and a whole lot more. Enjoy the video and stay tuned for Moore!

- Buck Moore

Friday, March 20, 2009

How to Take Great Pictures with Your Digital Camera

(there is a video on this topic below the blog entry)

I currently use a Kodak 5MP camera with (Kodak Easyshare C530) to take pictures of all the AV events I am part of and all the pictures for my fun website, simplyannoying.com. I bought it for less than $100.00 about two years ago or so and I don't want another one right away - it has everything I need, even though it's pretty tiny. It's a user-friendly camera aimed at the consumer, not pro.

No matter who a camera is designed for, never let that get in your way of taking great pictures; even someone who has a 10MP SLR can take bad pictures, if they don't know how to use it. With knowledge of a few simple principles and techniques, anybody can take decent pictures with an inexpensive camera.

I once took a picture for a restaurant owner to be published in a major newspaper and, after following guidelines, the owner loved it, it was printed and the rest is history. I am not in the business of taking newspaper photos, but that just proves that the 2MP camera I had at the time was, in the right hands, capable of taking great pictures (I am a videographer/filmmaker and I am very particular when composing/shooting images).

So, here are the guidelines to follow if you want to take great pictures with an inexpensive digital camera:

1) Say no to digital zooming! In my experience, I've never had a good shot with digital zooming from either a still camera or video camera. The specs might read: 30X Digital Zoom, but that means the resolution of the pictures will go down significantly as evidenced by excessively pixilated pictures. Optical zoom, where the lens itself moves, is the way to go when zooming. If you need more zoom, get a camera with a higher zoom capability or interchangeable lenses.

2) Use a tripod instead of a flash indoors. Tripod and flash in the same sentence? Yes, because when a camera is hand-mounted, the environment must be sufficiently bright in order to take blur-free images. If it is not so bright, a tripod will allow you to open up the iris (f-stop) and keep the picture still. I have a tripod that I got for $20.00 and it folds up into a small carrying case, is lightweight and has a removable wedge plate for quick mounting.

A flash does have it's place, though, when taking quick vacation photos or happy-time pictures at a social event or when taking pictures of people outside on a bright day - the flash will fill in their faces nicely.

3) When taking product shots, get up close and light the scene. But don't get too close if your camera can't focus up close. I use a technique called 'three-point lighting', where I set up a 'key light' in front of the product (on an angle, not straight on), a less intense light, called a 'fill' light (to fill in undesirable shadows and reveal detail) and a 'back light' (to add light from above in order to separate the subject from the BG or fill in shadows from above - also called a highlight or rim light, depending on how high above the back of the subject it is shining down from).

(See below for lighting techniques)

4) Monitor your temperature (of your color, that is) when taking product shots. When using more than one light, be sure they are the same color. Color temperature means that you should mix the right color values from lights to create even color reproduction. Daylight has a much higher color temperature than a standard light bulb. Even the new CFL bulbs are available in different color temperatures.

One of my favorite lights is the halogen, available in any hardware store. Try lighting techniques to see which works best for you. Check out these comparisons - taken with the EasyShare C530 for my eBay listings (by the way - the backdrop was bought at a fabric store for about six dollars! When put over my Ikea chair, there is no horizon line).

5) The rule of thirds - compose your shot so that you balance the frame with the subject. The product shot below (the first DaVinci photo) has the front corner of the VHS box just off center because the longer portion of the box occupies the left side of the frame. Picture your frame containing 9 boxes of the same size (two horizontal lines, two vertical lines) and balance your subject within those boxes.



Key, fill and highlight - the finished product shot!



Key light only.



Fill light only.



Highlight only.



Key light and highlight (no fill).



Flash only.



Flash and 3-point lighting.
(The big difference between this shot and the first shot is the shadow around the left edge on this shot - the flash, from directly in front, causes that shadow and doesn't separate the subject from the background very much - you can also see the flash lighting up the edges of the tapes on the right side).


A picture of my workstation (2007)
- I was trying to capture the lighting I use when I work at night recording and editing.


A product shot of Bodum cozies (aka 'French press').



One of my favorite shots - from a an AV gig the first time I went to Las Vegas. I held the camera still on an overpass garbage bin to get the steady shot with no blur.


A picture I took of an event I worked at in Toronto, in early 2009 (I take these for my website at www.presentation-av.com)


Hope this helps!!

- Buck Moore

Wednesday, October 22, 2008

Using Open Vocal Microphones


Microphones are THE essential component in just about every live situation. They are also one of the more difficult things to set up compared to other components used and once they are set up, the sound person must carefully monitor them because they now have to watch the users.

(The mic shown is an Apex podium microphone with a base attached - and an XLR connector built into the back. It's a low profile, matte black mic which works great with my Sony ECM windscreen. It hides nicely and, with a little EQ magic, it's sounds great! The talker shown had great mic technique!)



Once the sound person 'rings out' the loudspeakers, it's up to the user to work around the limitations of the system. There is a lot to consider for the sound person here, including microphone type, loudspeaker orientation and position of the 'source' (or presenter). The sound person follows a set of guidelines, which are well established in the audio industry, to maximize what we call 'gain before feedback' - or, getting the loudest, best quality signal from a sound system.


Once the sound system is set up properly, the person behind the microphone must do their part and speak directly into the microphone to get the loudest, clearest sound. If the speaker ('presenter') cannot be heard throughout the room, a series of checks must be performed to find out why - and fast, as an audience will not tolerate poor sound. Let's go over some of the most common causes of unclear vocals coming through a mic:


System not 'rung out' properly
When a sound system squeals, it means that either someone is pointing the microphone at a loudspeaker (which never works and can damage the speaker) or the sound system has not been tuned properly. Basically, the most efficient frequencies travel from the loudspeakers, back into the microphone and form a loop of sound we call feedback. Have you ever stood in between two parallel mirrors and saw and endless pattern of reflections? It's very similar to that.

When we turn up a sound system, certain frequencies start to ring before all others and we have to take these out before we can make the system any louder. We can achieve this with an equaliser (aka "EQ") that has multiple 'bands' for controlling individual regions within the sound spectrum. We simply take them out a little bit so they don't squeal, but this can only be done until the sound system will get as loud and clear as it gets - then we can't do it anymore.

Loud room
After we EQ the sound system properly within a room, we must now pay attention to the room. Even if it were possible to really CRANK the volume to incredible amounts, we would, at some point, only be increasing the volume of the room itself through the sound system.

This happens in rooms with loud HVAC systems or external noise problems (such as noisy service corridors or shipping areas right outside the room). When you start hearing the sound of the room, including audience sound, through the loudspeakers, it's time to investigate the possibility of briefing talkers on 'mic technique'.

Quiet talkers/singers
Assuming the sound system has been EQ'd ('tuned') and the room itself is not being amplified too much, the rest of the work is left to the talker or singer. Quiet talkers cannot be amplified without the risk of feedback (when going past the original tuning of the sound system or amplification of the room.

Quiet talkers can simply be reminded, before they speak, that they must speak up (or 'project') and stay within the useable range of the microphone (within 6 inches). They must be able to sense when they get too loud as well, by moving away from the microphone (unless a sound person is carefully monitoring them).

There's my three cents worth! Have a fantastic day!!

Saturday, July 12, 2008

Audiovisual Field Testing: Projection.

Report on AV Technology: What Works Well in the World of Multimedia Presentations (and What Could Work Better!).

CONTENT ASSESSMENT - PRESENTATION TECHNOLOGY - LIVE EVENT MULTIMEDIA

In my travels as a presentation AV and multimedia playback specialist, I continually face AV challenges and offer solutions during live events. During the last twenty years, I've been performing live, presenting material in front of groups and running the technical side of live performances, public speaking, multimedia playback and I know what works and what doesn't work.

Over these years, I've worked on many film and video projects as writer, director, camera person, actor and editor, and that experience has made me very interested in helping people assess their live presentation content. Whether it's a business presentation, live performance or film screening, I am very interested in what the end user experiences. In AV planning and content assessment, I am not a critic, I am the ultimate end user and I tell it like it is.

I'd like to start this AV field report with my technology choice for projectors:

Canon LV-7255 (and others in the LV series): This is my projector of choice. I've used several LV projectors and I like them all, especially the newer ones. The brightness is great for presentations of up to 150 - 200 people (with stereo screens on Dalite FastFold 7.5' x 10', front projection screens). I use longer VGA cable runs of 25 - 50 feet, so I use a Kramer D.A.(distribution amp) for the stereo display, but I have even run these projectors through a daisy-chain (one connected to the other) and a 50 foot VGA cable with no D.A. and I get great results every time.

I've really put these projectors through the paces and two of the reasons I rely on them are because of the manual zoom and the manual focus. It would be nice to have a horizontal keystone control, but the vertical control, especially auto-keystone, works very quickly and well.

Like many projectors I've used, when computer inputs are hot-swapped, you may end up with horizontal sync issues that result in the side of a presentation being cut off, but that is easily correctable with the 'auto PC' button on the top of the unit. I know it would be best not to hot-swap and have all computers hooked up to a seamless switcher and ready to go, with all resolutions set to the default 1024x768, but I am talking about the real world, where things are set up and swapped at a moments notice. Therefore, I need a projector which does not give me grief on the road.

Stay tuned for more!